Cutter Selection Guide – Acrylic/Plexiglass

STEELTRAK

The most amazingly accurate, easy to use cutter for sign-making for up to 4mm dibond. Designed with the sign making and the graphics industry in mind – every tool cuts on the same line. No mistakes, no special operator knowledge, no color coded production stops. All three tools are permanently attached to the cutting head. Just turn the wheel and the utility blade, acrylic scoring blade & composite twin wheel cutting tool is ready to use in a second.

EXCALIBUR 5000

The Excalibur 5000 is the essential finishing tool for every printer, graphics, photo, sign and framing workshop. Four precision cutters in one, standard utility blade, acrylic scoring blade, glass scoring wheel & twin wheel cutting tool. The Excalibur 5000 can be mastered within minutes.


Excalibur 3S

The Keencut Excalibur 3S new self-lubricating bearings on both cutting heads can handle harder substrates such as Aluminum Composite, PVC, foam board and other rigid substrates used by sign makers.

Evolution3 SmartFold

The ultimate tool for a busy production environment. The SmartFold can be affixed to any table or on the optional Evolution Bench. Ultra high precision .008″ accuracy.

Evolution3 BenchTop

Perfect for a busy studio or medium use production environment. Simply fasten to an existing flat bench surface or use with the M-Bench System. Ultra high precision .008″ accuracy.

Evolution3 FreeHand

Portable cutter for accurate, occasional cutting in a studio or workshop environment. Ultra high precision .008″ accuracy.

EVOLUTION-E2 CUTTER

The Evolution-E2 is an integrated wide format cutting system designed to revolutionise the speed, accuracy and convenience of the finishing process. Intended to fit any bench, the Evolution-E2 is accurate to within .008″ and includes a new bi-directional cutting head.

JAVELIN SERIES 2

The accuracy of the Javelin Series 2 makes it ideal for cutting banner materials, pop-ups and other display materials that require precise and accurate cutting to within .008″ over the full length of the cut. The Javelin Series 2 is designed to be a portable cutter bar or used with the optional Big Bench Xtra or Surface Mount Lift & Hold systems.

SABRE SERIES 2 GENERAL PURPOSE CUTTER

Designed to cut a wide range of sheet materials, the Sabre Series 2 GPC offers a standard of straight and square cuts accurate to within .03″. It includes blade depth adjustment and features a reversible Graphix Blade making it ideal for left-handed and right-handed operator.

JAVELIN INTEGRA

The new Javelin Integra is ideal for shops with low to medium output production that requires precise and accurate cutting to within .008” over the full length of the cut. The Javelin Integra is simply fastened to an existing flat bench surface with screws. The unit can easily be lifted off the base and stored or used as a portable cutter bar.

Simplex Cutter Bar

SIMPLEX CUTTER

Practical choice for cutting graphics, photos and signs mounted on foam-centered boards. Accuracy to within .03” guaranteed over the full length of the cut.

Contact Us

Questions or Comments? We encourage you to contact us whenever you have an interest about our services.

2 + 3 =